jester1614
NAXJA Forum User
- Location
- ventura california
89 xj 4.0 newly swapped 94 motor
fuel pump is not priming
batttery is brand new
I have 12 volts at terminal 30 at the fuel pump relay. when i jumper the relay I hear another relay (havent figured out what one, i think its by the radiator passenger side) clicking
swapped the relay with the ac relay, no change
at the ceramic resistor on the foward terminal i have .240 volts rearward terminal .172 volts
with the ceramic resistor bypassed i see 6 volts at the connector going to the fuel pump with key on engine off
any ideas (i am searching as well)
fuel pump is not priming
batttery is brand new
I have 12 volts at terminal 30 at the fuel pump relay. when i jumper the relay I hear another relay (havent figured out what one, i think its by the radiator passenger side) clicking
swapped the relay with the ac relay, no change
at the ceramic resistor on the foward terminal i have .240 volts rearward terminal .172 volts
with the ceramic resistor bypassed i see 6 volts at the connector going to the fuel pump with key on engine off
any ideas (i am searching as well)
Last edited: