OK:
I have checked at th Connector under the Hood, all is the same at
that point.
The Black wire, Pin #1 is supose to be the ground but is not acting grounded. I traced that black wire and the white/brown stipe wire to a white plug on the side of the Trans, at that plug the black wire is still not showing it is a ground. The 3 Solenoid wires are in a seperate Loom that goes behind the TC shift bracket and I can not see where it goes from there.
Should I pull the bracket to check the wires behind it, or open up the Trans Pan and test the Solenoids themselves ?
I just don't understand that all 3 Solenoids would show Zero Resistance and the Black ground wire shows nothing
I have checked at th Connector under the Hood, all is the same at
that point.
The Black wire, Pin #1 is supose to be the ground but is not acting grounded. I traced that black wire and the white/brown stipe wire to a white plug on the side of the Trans, at that plug the black wire is still not showing it is a ground. The 3 Solenoid wires are in a seperate Loom that goes behind the TC shift bracket and I can not see where it goes from there.
Should I pull the bracket to check the wires behind it, or open up the Trans Pan and test the Solenoids themselves ?
I just don't understand that all 3 Solenoids would show Zero Resistance and the Black ground wire shows nothing