ToxinNH
NAXJA Forum User
- Location
- Goffstown, NH
Any idea on the 1/4 guards with boxes?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
JcrOffroad's Prototypes for new product.
- Thread starter jcroffroad
- Start date
jcroffroad
www.jcroffroad.com
- Location
- Kalamazoo, mi
I am not 100% sure just yet. We need to get the 97+ prototype done and we'll be able to figure it out then. I can tell you, they will be affordable and readily available.
XJ&CHZ4ME
NAXJA Forum User
- Location
- Unionville, MO
Any chance of a person being able to order a set of quarter guards with either "blank" tail light boxes that could be cut out by the purchaser or w/o any tail light box on it at all?? I currently have a set of tail light boxes that I like and they are already on there and are set up w/ oval 2x6 LED's and would like to either retain them or at least use the LED's that I have in your quarter guards and just cut the holes into them myself for my own lighting configuration. Once again, thanks for continuing to support the XJ market as well as 
. You guys are truely an asset to the wheeling community. :thumbup:
. You guys are truely an asset to the wheeling community. :thumbup:
jcroffroad
www.jcroffroad.com
- Location
- Kalamazoo, mi
We plan to have corners with no tail light protection, meaning they end at the tail light line on the side of the jeep. This would allow for us with tail light boxes. We could make you a custom set, but it would probably cost a little bit more to adjust the design. It might be easy/cheaper to sell your complete tail light boxs and lights if that is the route you want to go.
XBoBJ
NAXJA Forum User
- Location
- Spencer MASS
Do you have a recomendation on where to get the leds/lights?
jcroffroad
www.jcroffroad.com
- Location
- Kalamazoo, mi
jcroffroad
www.jcroffroad.com
- Location
- Kalamazoo, mi
Through us
Daryl is working on getting those on our site right now! So in the next 10-15 minutes.
XBoBJ
NAXJA Forum User
- Location
- Spencer MASS
Through us
awesome, thanks!!!!
Best vendor out there IMO.
XJ&CHZ4ME
NAXJA Forum User
- Location
- Unionville, MO
That is all the convencing that I needed, I just purchased a set of the 1/4 guards w/o tail light protection and can contiune to run my current tail light boxes. Thanks, I am looking forward to receiving them! :thumbup:
monkeyevil
NAXJA Forum User
- Location
- Kalamazoo, MI
http://www.jcroffroad.com/Merchant2...&Product_Code=LEDKITXJ96&Category_Code=LIGHTS
You'll need an LED compatible flasher unit as well, if we can get that part from the same supplier it may be included later on in this kit... for now it's not.
WaXJ_Skier
NAXJA Forum User
- Location
- Bellevue, Wa
NAPA sells them for like $12
srmitchell
NAXJA Forum User
- Location
- Mckinleyville (Humboldt) CA
I understand the tube flare deal. Looks like one off is the way to go.
The 97 up stuff looks great!
The 97 up stuff looks great!
jcroffroad
www.jcroffroad.com
- Location
- Kalamazoo, mi
Excellent another source for people to find LED's. Be sure to get Flanges for the mounts, grommets will not fit in our 1/4's or tail lights.
JeepFreak21
NAXJA Forum User
- Location
- Cameron Park, CA
jcroffroad
www.jcroffroad.com
- Location
- Kalamazoo, mi
Oh, I dunno. I read that as if he was saying you could get Lights at Napa. I bet you could, never really looked.
WaXJ_Skier
NAXJA Forum User
- Location
- Bellevue, Wa
I meant the flashers
jcroffroad
www.jcroffroad.com
- Location
- Kalamazoo, mi
Oic, we'll try to find the part numbers on Monday.
- Location
- Wasatch Range
Diggin the 97+ Quarter armor w/integrated taillights. Availability?
These will make a great platform for adding rear tube flares........so, when is the front fender armor coming out?
These will make a great platform for adding rear tube flares........so, when is the front fender armor coming out?
jcroffroad
www.jcroffroad.com
- Location
- Kalamazoo, mi
jcroffroad
www.jcroffroad.com
- Location
- Kalamazoo, mi
Just an update on the 97+ stuff. We are building our second and last prototype tail light boxes today. Once we get these nailed, we're moving on the 1/4 panel guards. We will be working on the 1/4 panel guards all day on Wednesday, so I will have pictures of them then. If our stupid light mounts show up today, I should be able to get pictures of the tail lights w/ lights installed!
