pb_beaker
NAXJA Forum User
- Location
- in a van down by the river
will a tie rod and drag link from a 94 fit a 89? Both have dana 30'3
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
tie rod compatability
- Thread starter pb_beaker
- Start date
magimerlin
NAXJA Forum User
- Location
- Flatonia, Tx
the short answer yes. Search for zj tie rod upgrade. Its a bit beefier then a stock xj one.
pb_beaker
NAXJA Forum User
- Location
- in a van down by the river
thanks, ill look into it.
magimerlin
NAXJA Forum User
- Location
- Flatonia, Tx
Sorry for the short answer this a.m. had to go to work. Here are a couple links for ya.
I posted part #'s in post 7 of this one
http://www.naxja.org/forum/showthread.php?t=944708&highlight=tie+rod+ends
http://www.naxja.org/forum/showthread.php?t=951611&highlight=steering
I posted part #'s in post 7 of this one
http://www.naxja.org/forum/showthread.php?t=944708&highlight=tie+rod+ends
http://www.naxja.org/forum/showthread.php?t=951611&highlight=steering
