BIG NASTY
NAXJA Forum User
- Location
- Cedartown, GA
While doin a lil wheelin today.....going from 4 lo to 2 hi the shifter hung up between 4 hi and 2 hi. 4x4 is not engaged but Im not sure what the problem is ......Any ideas ????
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Shifter problems
- Thread starter BIG NASTY
- Start date
sjx40250
NAXJA Forum User
- Location
- Alexandria VA
check you vacuum lines
BIG NASTY
NAXJA Forum User
- Location
- Cedartown, GA
I will check that......would that cause the shifter to hang up?
Is the posi lock cable shift a good alternative ?
Is the posi lock cable shift a good alternative ?
98XJSport
Destiny is the rising sun
- Location
- Western Maine
It is if you have a vacum problem, I had a '87 YJ, wouldn't pull into 4x4, but I put it on the lift and it would go in easy, I had a friend put in the 4x4 posi-lock kit works without fail since, plus get 2 low outa the deal as well. But thats assuming that you have a vacum problem...