- Location
- Denver, CO
Just picked up the Dana 30 I will be using, thanks to a fellow CO board member.
I am going to complete this and then dial in the steering, it is going to be a slow process at first.
This is the list I have:
Trackbar Bracket JKS $43
Swaybar Brackets (x2) JKS $40
Akenobo Calipers Jeepsareus $209
Slotted Rotors Iron Rock $140
Hub Spacers (x2) JKS $40
D30 Truss Ballistic Fab $82
Artec Inner C Gussets Artec $80
WJ Knuckles $100
01 XJ Hubs $80
01 XJ Upper Ball Joints $40
01 WJ Lower Ball Joints $40
TOTAL $894
Barnes 4wd LCA Mounts HAVE
Barnes 4wd UCA Mount HAVE
Crane Diff Cover HAVE
Axle Tube Seals HAVE
Super 30 Kit w/ARB HAVE
Dana 30 R&P Install Kit HAVE
D30 HP 4.88 Gears HAVE
Two questions so far, if I get a set of Teves WJ knuckles, and the "Jeepsareus" Akenobo calipers, will I have to source a set of Akenobo caliper brackets? I can't tell if they come with the Jeepsareus setup.
Also, already having an aftermarket HD UCA mount for the passenger side, will it be effective to use the Balistic fab truss? Or should I grab some 2x4 thick box steel and fab one?
I am going to complete this and then dial in the steering, it is going to be a slow process at first.
This is the list I have:
Trackbar Bracket JKS $43
Swaybar Brackets (x2) JKS $40
Akenobo Calipers Jeepsareus $209
Slotted Rotors Iron Rock $140
Hub Spacers (x2) JKS $40
D30 Truss Ballistic Fab $82
Artec Inner C Gussets Artec $80
WJ Knuckles $100
01 XJ Hubs $80
01 XJ Upper Ball Joints $40
01 WJ Lower Ball Joints $40
TOTAL $894
Barnes 4wd LCA Mounts HAVE
Barnes 4wd UCA Mount HAVE
Crane Diff Cover HAVE
Axle Tube Seals HAVE
Super 30 Kit w/ARB HAVE
Dana 30 R&P Install Kit HAVE
D30 HP 4.88 Gears HAVE
Two questions so far, if I get a set of Teves WJ knuckles, and the "Jeepsareus" Akenobo calipers, will I have to source a set of Akenobo caliper brackets? I can't tell if they come with the Jeepsareus setup.
Also, already having an aftermarket HD UCA mount for the passenger side, will it be effective to use the Balistic fab truss? Or should I grab some 2x4 thick box steel and fab one?