tcf26
NAXJA Forum User
- Location
- South Rockwood, Michigan
Well I picked up a 91 XJ Overhead console to put into my MJ and I had to cut it right behind the sunglasses dropdown so I had to get rid of the rear lights. Well now I realized that the rear lights are the only ones that come on with the dome lights. Everything else works but I took the rear lights and replaced the front ones with them. I took the whole white piece with the bulbs and I noticed it has a red wire that the front ones don' have. Well since I hooked that up the lights stay on constantly and won't turn off unless I hold the light buttons, as soon as I let them go then the light comes right back on and nothing happens when I open the door. The yellow wire is hooked up correctly I just need to know which wires to the bulbs and light switches have to be hooked up. There is a red wire a black wire and two green wires one that went to the front and one that went to the back. Any help would be appreciated. I want these to come on with my domes and also have the turn on with the switches. I have changed it back and forth and I know I am missing something.
P.S. I have the wiring diagram but it isn't helping. I need to know why the lights are staying on. I couldn't get them to come on with the domes when the front lights were still hooked up before I changed them to the back ones with the red wire.
I hope this makes sense to someone out there!! I put the yellow wire to the black on my dome lights so as far as I have heard that is where it goes?
P.S. I have the wiring diagram but it isn't helping. I need to know why the lights are staying on. I couldn't get them to come on with the domes when the front lights were still hooked up before I changed them to the back ones with the red wire.
I hope this makes sense to someone out there!! I put the yellow wire to the black on my dome lights so as far as I have heard that is where it goes?