ZAC
NAXJA Forum User
- Location
- Salt Lake City
Every time I go wheeling this noise gets worse and worse. It is a clunk coming from the drivers side front end when the weight shifts forward or back. Like when you tap the brakes at low speeds or start out at a light it happens. I can grab a hold of the sway bar from underneath and shift the weight, kind of like bench pressing your jeep, and have it happen. I have disconnected the sway bar and pushed up and pulled down and it still happens.
I have a aftermarket trac bar and when I push up and down on the sway bar with one hand on the track bar hiem joint I can feel it when it happens, like a creak or clunk like the metal is binding up on itself but not bad, just enough to feel the vibration, I sprayed WD-40 and didn't change a thing. have tighened everything mentioned on my searches like control arms, and everything on the trac bar mounting bracket, have pretty much tightend everything I can get a wrench on under there and nothing.
anyone have any suggestions?
I have a aftermarket trac bar and when I push up and down on the sway bar with one hand on the track bar hiem joint I can feel it when it happens, like a creak or clunk like the metal is binding up on itself but not bad, just enough to feel the vibration, I sprayed WD-40 and didn't change a thing. have tighened everything mentioned on my searches like control arms, and everything on the trac bar mounting bracket, have pretty much tightend everything I can get a wrench on under there and nothing.
anyone have any suggestions?