trailxj
NAXJA Forum User
- Location
- las vegas, nv
well as you can see in the pic, its time to rethink my bumpstops and do a little more trimming. I have tried 2 hockey pucks glued together, then glued to the 2" bumpstop thats in there, but they keep breaking apart and either coming out of the coil..or getting stuck in the coil. perhaps its the glue im using? what are people using that use hockey pucks and they stay in there?
ive also looked at these new slick bumpstops from jks...but they are a bit too spendy.. http://www.jksmfg.com/adjustable_bumpstops.htm
I am going to trim another 1.5" to 2" off the fender as well as come up with some sort of bumpstop extension.
what kind of stuff do you guys use..that works and stays in the coil?
in this pic, there is actuall another 1.5" of fender below the crease that is bent under by the tire..so that definatly has to go, along with a bunch just forward of the door..
ive also looked at these new slick bumpstops from jks...but they are a bit too spendy.. http://www.jksmfg.com/adjustable_bumpstops.htm
I am going to trim another 1.5" to 2" off the fender as well as come up with some sort of bumpstop extension.
what kind of stuff do you guys use..that works and stays in the coil?
in this pic, there is actuall another 1.5" of fender below the crease that is bent under by the tire..so that definatly has to go, along with a bunch just forward of the door..