FlameRedXJ
NAXJA Forum User
- Location
- Ontario, Canada
I have a 99XJ with 4.5 RC lift. Total lift is 5.5 with a spacer in front and 3.5 leaf pack + 2" block in rear. It has the lower control arms supplied in the kit and stock upper arms.
Have been having problems since installing RC control arm drop bracket.
First the axle shifted 1" left due to stock track bar, so now I installed one for kits up to 6" and had the rig aligned.
NEW PROBLEM:
Now on cornering I see that the top of the tie rod links rubs on the body - especially when going up a hill and turning right. Since installing the drop brackets I have also had to tighten the top bolts on the links twice now.
My knowledge of front steering/suspensions is very limited, but Im working on that lol...
Thanks!!
Have been having problems since installing RC control arm drop bracket.
First the axle shifted 1" left due to stock track bar, so now I installed one for kits up to 6" and had the rig aligned.
NEW PROBLEM:
Now on cornering I see that the top of the tie rod links rubs on the body - especially when going up a hill and turning right. Since installing the drop brackets I have also had to tighten the top bolts on the links twice now.
My knowledge of front steering/suspensions is very limited, but Im working on that lol...
Thanks!!