Crashsector
NAXJA Forum User
- Location
- Annapolis, MD
I realize this may be a stupid question. I have a very, VERY seized front axle stub nut and a bad U-joint. Is there ANY way possible to remove the stub and replace the joint without removing the nut?
I thought that maybe if I removed the three star-headed bolts holding the backing plate on the stub and backing plate would come off as one unit. It would be unwieldy replacing the joint, but probably possible. Any reason this wouldn't work?
Thanks in advance.
--Andy
I thought that maybe if I removed the three star-headed bolts holding the backing plate on the stub and backing plate would come off as one unit. It would be unwieldy replacing the joint, but probably possible. Any reason this wouldn't work?
Thanks in advance.
--Andy