- Location
- NE Texas
im trying to remove my leafs to build a bastard pack..
First off, is there a nut on the inside of the frame rail for the Top shackle bolt? This SOB bolt is tight and very unforgiving. Im using a 26" breaker bar and i can only move it with my foot. it will "Pop" 1/4 at a time.
I have sprayed atleast 5 times with PB blaster and still no reward..
Second: My goal for the rear is 5" +/- Here is my list of parts
stock leaf packs out of a 01' with 35k'ish miles
stock 89 packs with 200k miles
3" AAL
My plan is to use the 01' packs and cut the eyes (ends) off the top leaf in the old pack to create a "Double AAL" my Guestimation is, this should net me around 4" and then i will use an extended 1.5" shackle
anyone here done the same or similar?
First off, is there a nut on the inside of the frame rail for the Top shackle bolt? This SOB bolt is tight and very unforgiving. Im using a 26" breaker bar and i can only move it with my foot. it will "Pop" 1/4 at a time.
I have sprayed atleast 5 times with PB blaster and still no reward..
Second: My goal for the rear is 5" +/- Here is my list of parts
stock leaf packs out of a 01' with 35k'ish miles
stock 89 packs with 200k miles
3" AAL
My plan is to use the 01' packs and cut the eyes (ends) off the top leaf in the old pack to create a "Double AAL" my Guestimation is, this should net me around 4" and then i will use an extended 1.5" shackle
anyone here done the same or similar?