- Location
- Murrieta
Well after my jeep looked like this:
I went to town with the die grinder doing everything I wanted to do when I had a full body but was afraid to do.
Ended up using the high lift as a porta power, cutting out the rockers, the rear quarter, and all of the sheet metal inside the cab so the cage can tuck as tight as possible. Going to try and do what Goatman did with the hybrid cage.
I also made my own rendition of half doors. I wanted the look of doors without the weight. I removed the door skin and will cut it flush with the bottom of the window. I am going to weld these to the door bars of the cage to give the sheet metal a chance.
I went to town with the die grinder doing everything I wanted to do when I had a full body but was afraid to do.
Ended up using the high lift as a porta power, cutting out the rockers, the rear quarter, and all of the sheet metal inside the cab so the cage can tuck as tight as possible. Going to try and do what Goatman did with the hybrid cage.
I also made my own rendition of half doors. I wanted the look of doors without the weight. I removed the door skin and will cut it flush with the bottom of the window. I am going to weld these to the door bars of the cage to give the sheet metal a chance.