steve-o
NAXJA Forum User
- Location
- Boerne, Texas
This question is for those of you with rear disc brakes. I converted my Dana 44 ove to discs using parts of a GC Dana 35. I have had a problem with them leaking oil at the seals. I replaced one side a while ago and the leaking has stopped. I replaced the other a few days ago and continues to leak. My question is what is the correct torque spec on the 4 bolts that bolt the backing plate to the axle flange? I thought it was 55 ft lbs but it was still leaked from between the disc and the backing plate. I dropped it to 35 and now it continues to leak in the original place, between the flange and the backing plate.