dhodgee
NAXJA Forum User
- Location
- South Hutchinson, Ks
I bought new Fox shocks. Everything I read about the factory bar pin left me wondering why people don't just cut through the floor and doing something about it... AND that's what I did! :idea:
I picked up this spring mount from TSC for $12.
Uploaded with ImageShack.us
Then Removed the factory barpin once and for all. I drilled a hole up through my floor to find the mounting location from the top. Then I measured about 3" around the hole in the top and started grinding...
Uploaded with ImageShack.us
Here's what the mounting looked like before I welded it in...
Uploaded with ImageShack.us
Not to shabby. A lot of good surface for a good bead.
I picked up this spring mount from TSC for $12.
Uploaded with ImageShack.us
Then Removed the factory barpin once and for all. I drilled a hole up through my floor to find the mounting location from the top. Then I measured about 3" around the hole in the top and started grinding...
Uploaded with ImageShack.us
Here's what the mounting looked like before I welded it in...
Uploaded with ImageShack.us
Not to shabby. A lot of good surface for a good bead.