Ewenm
NAXJA Forum User
- Location
- Gold Coast Australia
hi all, any tricks for getting the lower link pin out axle end (d30 94 XJ)
i am fitting JKS quick disconnects and have removed the link arm but cannot loosen the lower threaded bolt, i only have 3/8 drive tork sockets, ive soaked the bolts in WD40 and left it, any suggestions, oh by the way i dont have access to heat, i thought of locking two nuts together and then with a socket on one end and spanner on the other it might work, other option is to cut the head off with an angle grinder and then drill it out ( yeah i know to watch out for the thread) what do you think am i on the right track
Ewen
i am fitting JKS quick disconnects and have removed the link arm but cannot loosen the lower threaded bolt, i only have 3/8 drive tork sockets, ive soaked the bolts in WD40 and left it, any suggestions, oh by the way i dont have access to heat, i thought of locking two nuts together and then with a socket on one end and spanner on the other it might work, other option is to cut the head off with an angle grinder and then drill it out ( yeah i know to watch out for the thread) what do you think am i on the right track
Ewen