BRIANHO13
<- Yum Chocolate
- Location
- Spring, TX
Ok so two weeks ago I started the xj to move it started ok but when I went to shut her down turned the key off but she kept running. Luckily she is a stick so I just dumped the clutch while holding the brake down to kill it.
Yesterday I went to move it and she wont start just cranks and cranks no start. No fuel pump and no spark. I installed a new cps nd still no pump or spark.
Through reading it looks as if no signal is getting to the ASD relay which inturn turns on a couple more things including the fuel pump ( I ran a wire straight to the pump from the battery and know it works).
I think my ignition switch is shot.
Its a 98.
My question is, what wires from the column do I wire together for ON (through a switch of course)?
And which ones do I wire to a push button to trip the starter relay?
Yesterday I went to move it and she wont start just cranks and cranks no start. No fuel pump and no spark. I installed a new cps nd still no pump or spark.
Through reading it looks as if no signal is getting to the ASD relay which inturn turns on a couple more things including the fuel pump ( I ran a wire straight to the pump from the battery and know it works).
I think my ignition switch is shot.
Its a 98.
My question is, what wires from the column do I wire together for ON (through a switch of course)?
And which ones do I wire to a push button to trip the starter relay?