kenny schmitt
NAXJA Forum User
- Location
- US
So im ready to order my 6.5" from rustys but i wanted to make sure all my old parts would come off easy and they are not. I know it could be worse but this is what im dealing with. I have a 1996 2dr 5spd xj with a 8.25 and a 231 tc so the rear came apart good exept some broken bolts on the top strut mount (tapped) now the front contol arms are giving me lip. so far on the passenger side i was able to romove the upper and lower cotrol arm bolt that mounts to the front end. as for the lower control arm where it is mounted to the frame the bolt is seazed to the inside of the control armi got it to move 2mm with alot of banging but cant get it out and it doesnt hep that i dont have a impact gun. should i just cut this bolt( i can just get parts off of an 89 xj ) it should be the same the next problem is with the upper control arm where it mounts ont the frame. I got the inside bolt off and the part inside the chassis spins but the stopper thing stops it from doing a full 360 soi assume i should bang it out but i have the motor right there what should i do i guess this project isnt going that smooth as i wanted.
last question can i use an impact gun if i convert my ac compressor to an on board compressor Thanx guys
last question can i use an impact gun if i convert my ac compressor to an on board compressor Thanx guys