planning a work party at my shop thinking 3/16/13 and 3/17/13

[CSB_YJ]

You know I'll be there

 

[AwesomeXJ]

I'm in for this one.

Unless I can get some overtime at work that is

 

[Mtb Jak]

I am definitely in for this! Love being able to poke around under the rig!

 

[CoryMJ89]

How far is kalama fromvancouver?

 

[BPB]

5 minutes

 

[Bronzewyrm]

i dono how much compressed air is avalable, or if there any interest, or room enough to do. im thinking abot throwing together a mobile paint/body kit. im willing to show and spray if people have a need for it...

thoughts?
Bronze.

 

[Mnkyboy]

The shop compressor is plenty big enough. The problem would be space, I was doing all the paint and body in a tarp building next to the shop but the wind this winter was kicking its butt so I had to move it to my house.

 

[Mnkyboy]

How far is kalama fromvancouver?

Its about 27 miles from the bridge.
Its really not that far, I drive to Portland everyday for work.

 

[NW99XJ]

i dont how much compressed air is available, or if there any interest, or room enough to do. i'm thinking about throwing together a mobile paint/body kit. i'm willing to show and spray if people have a need for it...

thoughts?
Bronze.

I would very much be interested in this.
(...but I have to DJ the 4Wheel Parts March Madness Event on the 16th)
Thanks for throwing that out there Jon, and being so willing to share your expertise.

 

[CoryMJ89]

Dang but of a drive I'm 30 min away from the bridge

 

[Mnkyboy]

My work is at 181st and airport way so basically right between portland and gresham, it takes me about 40-45 min each way.

I figure it would take you roughly about the same from washougal.

 

[98fivespeed]

SPECFab! Thanks for hosting this again. Looks like I'll be able to come up Sunday. I have lots to do on the jeep and was wondering if we might be able to install some Brown Dog motor mounts and a new trans mount that I have? I am going to get my axles to you guys by the end of the month hopefully. Tired of looking at gears and lockers in a box...

Thanks in advance again!
jb

 

[SPECFab]

just come up and hang out we will git it done just depends on lift time

 

[XJHUGHES]

Think there is enough open time to install a 3 inch lift on a cherocar?

 

[Mnkyboy]

That only takes a couple hours on the lift.

 

[dellstopjeep]

17 minutes at specfab

 

[Gold Cobra]

17 minutes at specfab

14 if I'm not there to annoy them.

 

[BPB]

5 if I don't stop every person to tell them the same story.

 

[kenny811]

4 if we stop posting about posting about it

 

[XJHUGHES]

now if i can actually find the time to do it next weekend