Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
You might take your life in your hands and put the whole thing in the wife's oven at 450 for a half hour. It may pop easy. While it is hot, you can pour some water over the inner piece, causing it to shrink as well.
You might take your life in your hands and put the whole thing in the wife's oven at 450 for a half hour. It may pop easy. While it is hot, you can pour some water over the inner piece, causing it to shrink as well.
Lots of people do it that way. Once you get two cuts 180* from each other they'll pretty much just fall out (okay, hit them with a hammer and they will).
yea thats what I was told and when I tried it with the relief cut nada ..I didnt really grind off much of the OEM material (remaider of tube in the C & C itself ).
Prep the tube and inner circle of the knuckles, throw them in an oven for about 20-30 min... get the hot gloves out and run those bastards back into the garage and slide them onto the tube.
Might take a little modivation to get them started but they will slide onto the tube. As they cool down slowly, they'll seat themselves.