MG2000XJ
NAXJA Forum User
- Location
- Salt Lake City, UT
So here is my first writeup ever, take it easy on me. Just finished up on a little project I started earlier today. A couple years ago I bought a used intake that was for my buddy's Honda Accord. I figured I could build my own... So I cut it half with a hack saw and zip tied it into place sitting in the empty stock box. Today I decided to remove the box and build some brackets.
I started out with some 3/4" flat aluminum and bent it to where I wanted the braces to be. I used self tappers and secured them into the wheel well.
I then drilled 2 small holes in the intake and secured the intake tube to the brackets.
Tightened everything up and slipped the filter back on (yes I need a new one) and took it out for a ride.
Final product:
:flame: away
I started out with some 3/4" flat aluminum and bent it to where I wanted the braces to be. I used self tappers and secured them into the wheel well.
I then drilled 2 small holes in the intake and secured the intake tube to the brackets.
Tightened everything up and slipped the filter back on (yes I need a new one) and took it out for a ride.
Final product:
:flame: away