CompleteCherokee
NAXJA Forum User
- Location
- Acworth, GA
Some PB Blaster on rusty areas should help narrow down where the noise is coming from (NOT where brakes / bearings are though)
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Lots of metal in the front case
- Thread starter Chris291
- Start date
CompleteCherokee
NAXJA Forum User
- Location
- Acworth, GA
glad to hear its something relatively simple
Devilfrog
NAXJA Forum User
- Location
- Duncan, BC
My rotors got some rusty while I was rebuilding my MJ... First trip was an interesting run of noises, pulls and vibrations for the first 100km or so. Then she smoothed right out and was all goodness again. Rotors looks clean again, probably going to need to swap pads sooner as well (bought cheap one since I was expecting this).
And FYI - I had BOTH my front (D30hp) and rear (C8.25) rebuilt and released to 4.56 for $1500 at a local (Western Canada) 4x4 shop (shop rate was $100/hr).
Those are the guys I trust ... That dealership quote was nuts, and things are supposed to be cheaper your side of the border.
And FYI - I had BOTH my front (D30hp) and rear (C8.25) rebuilt and released to 4.56 for $1500 at a local (Western Canada) 4x4 shop (shop rate was $100/hr).
Those are the guys I trust ... That dealership quote was nuts, and things are supposed to be cheaper your side of the border.
Last edited:
