Sparkman
NAXJA Forum User
- Location
- Ludlowville, NY
I am getting ready to order UpCountry coils and leafs for my '01. It's sagged about 1.25" in the back and I want to fix it before I mount the 30x9.5 T/A KO's I just bought.
I keep seeing different part numbers for the left and right coils, and sometimes different spring codes for the left and right leafs. None of the online OEM replacement suppliers seem to list two coils or leafs, but the online dealer sites do. The tags on my OEM coils show that they are a different part number. I can no longer read the leafs due to rust.
Can I just buy two 52002392's and two 52088104's and be happy with the results? I plan on getting bushings as well.
Do the aftermarket lift kits use the same springs left and right?
I assume the different springs from the factory are to compensate for the weight of the driver, am I correct?
My u-bolts are still in good shape, is it essential that I replace them? I was able to get my rear upper shock bolts out last week without any breaking, used plenty of PB Blaster though. I just put some neverseize on them and put them back in until I make up my mind what shocks I want.
Thanks!
I keep seeing different part numbers for the left and right coils, and sometimes different spring codes for the left and right leafs. None of the online OEM replacement suppliers seem to list two coils or leafs, but the online dealer sites do. The tags on my OEM coils show that they are a different part number. I can no longer read the leafs due to rust.
Can I just buy two 52002392's and two 52088104's and be happy with the results? I plan on getting bushings as well.
Do the aftermarket lift kits use the same springs left and right?
I assume the different springs from the factory are to compensate for the weight of the driver, am I correct?
My u-bolts are still in good shape, is it essential that I replace them? I was able to get my rear upper shock bolts out last week without any breaking, used plenty of PB Blaster though. I just put some neverseize on them and put them back in until I make up my mind what shocks I want.
Thanks!