freerider15
NAXJA Forum User
- Location
- FoCo, Crawlorado
Well, still progressing...
Got the Trans Fan Mounted the other night, and then started on the plumbing only to get one hose mocked up. Realized that I was a few feet short on the second one...ugh.
I got a box FULL of Weatherpack stuff (enough to last me the next 5 years), so I've turned back to the wiring.
I used to hate wiring, but the feeling of now being able to easily trace wires, and more so getting to get rid of more wires, bulky connectors, etc. feels great :greensmok:
Though, to be honest, at this point it would have been quicker to take the OEM stuff, and start from scratch :laugh:
All of my fuel cell filler stuff was supposed to be here Friday, but the fender mount kit from Summit changed from shipping yesterday, to an ETA of 5/23...greaaaat.
So, looks like I need to order if from Speedway to get here in time. I'll at least get the fill neck and such installed so I can get the fuel cell back in.
This weekend plans are to:
Buggy:
- Finish ALL wiring, remounting, and get labels made and attached (this will by far be the biggest time suck).
- Get the fuel cell fast fill neck installed
- Get the trans cooler lines cut, fitting on, firesleeved, and connected
- Reseal Speedo (most of my leaking seems to be coming from there)
- Top off t-cases
Truck/Trailer:
- Install power steering filter
- Install Trans filter housing base plate and filter housing
- Pressure Wash and Stain trailer deck
- Go through trailer hubs
IF I can ACTUALLY get all that done by the end of this coming weekend, it will only put me about 25% behind my written schedule :laugh:
Got the Trans Fan Mounted the other night, and then started on the plumbing only to get one hose mocked up. Realized that I was a few feet short on the second one...ugh.
I got a box FULL of Weatherpack stuff (enough to last me the next 5 years), so I've turned back to the wiring.
I used to hate wiring, but the feeling of now being able to easily trace wires, and more so getting to get rid of more wires, bulky connectors, etc. feels great :greensmok:
Though, to be honest, at this point it would have been quicker to take the OEM stuff, and start from scratch :laugh:
All of my fuel cell filler stuff was supposed to be here Friday, but the fender mount kit from Summit changed from shipping yesterday, to an ETA of 5/23...greaaaat.
So, looks like I need to order if from Speedway to get here in time. I'll at least get the fill neck and such installed so I can get the fuel cell back in.
This weekend plans are to:
Buggy:
- Finish ALL wiring, remounting, and get labels made and attached (this will by far be the biggest time suck).
- Get the fuel cell fast fill neck installed
- Get the trans cooler lines cut, fitting on, firesleeved, and connected
- Reseal Speedo (most of my leaking seems to be coming from there)
- Top off t-cases
Truck/Trailer:
- Install power steering filter
- Install Trans filter housing base plate and filter housing
- Pressure Wash and Stain trailer deck
- Go through trailer hubs
IF I can ACTUALLY get all that done by the end of this coming weekend, it will only put me about 25% behind my written schedule :laugh: