wileymotorsports
NAXJA Forum User
- Location
- Arizona
Hello, so Im trying to design a 4 link front suspension for my xj. Im use to the rear 4 link setups off of trophy trucks so I was thinking about doing something like that for the front, but I wouldn't have enough room to clear the oil pan with the upper links. So my question is what if the bottom control arms were angled and used to center the axle, and the upper control arms would go straight back to a frame mount. The coilover and bypass shocks would then be mounted to the upper control arms. hopefully that makes since ha. Has anyone done a similar setup?
Last edited: