Here is there part list from the instruction manual for the 4 inch superlift kit,
PART NO DESCRIPTION ATTACHING HARDWARE
(Qty.- if more than one) (Qty.)
01-550.......................... (2) front coil spring
01-522.......................... (2) rear leaf spring
018............................... (2) 1.5” lift block
10184........................... (4) U-bolt...................................... (8) 1/2” extra thick flat washer
(8) 1/2” fine-thread nyloc nut
55-03-5073...................lower trailing link, front..................(2) bushing half
driver side (1) sleeve
(1) zerk fitting
55-04-5073...................lower trailing link, front..................(2) bushing half
passenger side (1) sleeve
(1) zerk fitting
55-12-5140...................(2) upper trailing link, front
55-02-5140................. (2) transfer case drop bracket,..... (4) 10mm x 60mm bolt
1994-2003 models (4) 10mm flat washer
(4) 10mm lock washer
OR
55-14-5140................. (2) transfer case drop bracket,..... (4) 10mm x 50mm bolt
1984-1993 models (4) 10mm flat washer
(4) 10mm lock washer
55-04-5140...................transfer case shifter plate............. (2) 5/16” x 1”
(2) 5/16” SAE washer
(2) 5/16” nyloc nut
(2)6mm x 20mm bolt
55-01-5067...................(2) anti-sway bar bracket, front.....(2) 3/8” x 1-1/2” bolt
(2) 3/8” nyloc nut
(2) 5/8” OD x 7/16” sleeve
55-09-5064...................(2) anti-sway bar link, front........... (2) 7/16” x 2-3/4” bolt
(2) 7/16” Nyloc nut
(4) poly bushing
(4) sleeve
66-20-5100.............(2) lower compression travel....... (2) 5/16” x 1-3/4” self-tapping bolt
stop spacer
1106.......................... pitman arm........................ cotter pin, 1/8" x 2"
55-08-5070 ..................adjustable track bar, front..........(2) bushing half
(1) sleeve
FORM #5140.01-102605 PRINTED IN U.S.A. PAGE 3 OF 12
(1) extra-thick washer
(1) 1/2” X 3-1/2” bolt
(1) nyloc nut
(1) spacer
(1) tapered spacer
(1) heim joint end
(1) 1/2” x 3-1/2” bolt w/ hole
(1) 1/2” castle nut
(1) 1/2” SAE washer
(1) cotter pin
(1) 3/4” jam nut
55-13-5140...........brake line bracket, rear.... (1) 1/4” x 3/4” bolt
(1) 1/4” nyloc nut
85121...................... (2) front shock absorber......... (2) shock hardware pack
85306........................... (2) rear shock absorber....... (2) shock hardware pack
86010................ (4) yellow shock absorber boot.... (4) shock boot cable tie
0034............................. Superlift badge......................... alcohol wipe pad
so from the looks of it, comes with everything i need (brake bracket, shocks, tcase drop bracket). Will i need longer brake lines with a 4 inch lift or will the drop bracket do fine? and also i can get this at a sum what discounted price since i can order it from my job, ill find out the price 2morrow.
Thanks alot for the info
Jhery.