I got the skid-row t-case skid and although its beefy it hangs pretty low, I was just thinking of using 1/4 inch steel that I have laying around cutting a rectangular piece that would fit from frame rail to frame rail big enough to cover the t-case and bolting up with self taps right into the bottom of the frame rail. Or welding on some L-channel to the ends and putting bolts thru that into the sides of the frame rails. This would make it like a belly up skid the steel would fit flush up against my frame rails. I would bolt up the piece of 1/4 inch right after my cross memember every other skid plate still uses the stock cross memember to bolt too. Just wanted to see what you guys thought of that idea..........