Gauge cluster

[mtnbikeboy]

I have an '87 XJ 4.0L. Several of the gauges are sticky and it has the cluster w/ the large fuel gauge and no tach. If I were to find a gauge cluster w/ a tachometer is all the wiring in place to power it(the tach) or would I have to run a tach wire. Also, would the wires for the large fuel gauge work on a small gauge.

I have considered aftermarket gauges but all the ones I've seen are too large to replace the stock ones in the stock location. Thanks for any help.

Tim

 

[Matthew Currie]

If you have gauges, the tach cluster is plug and play. Just be aware that if you get a cluster from an 88 to 90, you might have a different connnector for the speedo cable, so bag that too if you can.

 

[ZmOz]

Yep, just plugs right in if you already have all the gauges but a tach. If you just have a speedo and a fuel gauge, then you'll need to replace the oil pressure and temperature senders to get the gauges to work. I used the cluster out of an '87 on my old '90, and the speedo cable plugged in just fine.