XGarfX
NAXJA Forum User
- Location
- North Jersey
I'm running the csf 3 core rad and was wondering if anyone here is running that with a taurus e-fan? I believe the three core is thicker then my original radiator but dont recall how much thicker, I installed it a while ago. Does anyone have measurements of a taurus fan? If your running that setup did you have to do anything besides trimming the taurus shroud? I'm just reading up stuff about the efan swap deciding what i want to do for a controller, how i want it to run stuff like that. I'm probly gona leave my xj e-fan in there and the taurus fan replace the mechanical fan in the xj. Probly get some type of temp controller and also have a manual over ride. Only reason im considering the swap is because my fan clutch is showing signs of failure as it has about 120k on it. I wheel in the rocks a lot esp in the summer and i already run my stock xj efan with a manual over ride switch for wheeling to help keep it cool, id rather hear that fan hum all the time on the trail rather then hear it kick on and off lol wow this post got long ok so ya anyone got some tips for fitting a 3 core and taurus fan hook it up! thanks guys
*one thing i want to make clear is i DONT have any over heating problems, zero, none at all my cooling system runs at A top, just considering the swap for a cool (no pun intended) swap to give me something to do and also because its better for wheeling, idling, my fan clutch is starting to go ect.*
*one thing i want to make clear is i DONT have any over heating problems, zero, none at all my cooling system runs at A top, just considering the swap for a cool (no pun intended) swap to give me something to do and also because its better for wheeling, idling, my fan clutch is starting to go ect.*
Last edited: