tonexj
NAXJA Forum User
- Location
- windsor, ca
So i got 4.5" coils, 1.5" spacers, and upper/lower adjustable control arms. an extended length track bar w/ factory frame mount, all except spacers are from rough country.
i've had problems ever since the installation of the kit with lining up my coils with the bumpstops and coil buckets so everythings straight and the axles directly under the jeep where it should be. right now my control arms are at 18" eye to eye for the lowers, and 17" for the uppers. here's my problem:
Driver Side:
i don't know if you can see it, but the coil seems to be tilting back near the bottom, and also compressing more towards the inside of the truck and making the middle of the coil protrude out!
Passenger Side
so i think its either my control arms are out of whack again but i dunno how considering i did each side to match the other, maybe a bit longer than specified but definitley the same exact length. or i was thinking the trackbar i got with my 4.5" rough country x-series kit cant handle the spacer adding a little heigth. what do you guys think? death wobble is brutal below 40 then it smooths out.
i've had problems ever since the installation of the kit with lining up my coils with the bumpstops and coil buckets so everythings straight and the axles directly under the jeep where it should be. right now my control arms are at 18" eye to eye for the lowers, and 17" for the uppers. here's my problem:
Driver Side:
i don't know if you can see it, but the coil seems to be tilting back near the bottom, and also compressing more towards the inside of the truck and making the middle of the coil protrude out!
Passenger Side
so i think its either my control arms are out of whack again but i dunno how considering i did each side to match the other, maybe a bit longer than specified but definitley the same exact length. or i was thinking the trackbar i got with my 4.5" rough country x-series kit cant handle the spacer adding a little heigth. what do you guys think? death wobble is brutal below 40 then it smooths out.
Last edited: