1985xjlaredo
NAXJA Forum User
- Location
- Kansas City
SO I have the Blower on high and put it in reverse, blower motor dies and the blinkers quit. They are not on the same Fuse and both of the fuses for them are not blown. Here is a pic of the wiring diagram off of the ignition switch for the run position.
http://memimage.cardomain.net/member_images/2/web/2414000-2414999/2414441_21_full.jpg Just in case you cant see the pic.
My Wipers, Blinkers, Back up lamps, defrost (rear), and blower will not work. The engine will start and run fine. My question is can i assume that the "14 brn" 14 gauge brown wire from the ignition switch is to blame or could just the 5.5amp circuit breaker case this problem? I would also think to assume that the problem with the wire is after it splits off to the Horn Relay and the Engine Circuits since they both work correctly? Any help would be great. Im not the best at reading these diagrams . Thanks in advance
http://memimage.cardomain.net/member_images/2/web/2414000-2414999/2414441_21_full.jpg Just in case you cant see the pic.
My Wipers, Blinkers, Back up lamps, defrost (rear), and blower will not work. The engine will start and run fine. My question is can i assume that the "14 brn" 14 gauge brown wire from the ignition switch is to blame or could just the 5.5amp circuit breaker case this problem? I would also think to assume that the problem with the wire is after it splits off to the Horn Relay and the Engine Circuits since they both work correctly? Any help would be great. Im not the best at reading these diagrams . Thanks in advance