The Adam Blaster
NAXJA Forum User
- Location
- Alberta
I need to know the stock backspacing for the rims on a '98.
Theh info i've learned so far is that they are 15"x7", 5 on 4.5" bolt pattern, and the center bore hole is 71.5 mm in diameter.
But, still no idea on what the backspacing is...
My plan is to go up to a 8" rim, and an 11.5" wide (maybe 12.5") tire, but i want the rims to push the tires out quite a bit farther so i lose this annoying rubbing on the lower control arms.
Right now i've got 10.5" wide tires, and they rub at about 85% of full lock.
Anyways, i'd go measure my own rims, but they all have tires mounted on them making it harder to get an accurate measurement.
Theh info i've learned so far is that they are 15"x7", 5 on 4.5" bolt pattern, and the center bore hole is 71.5 mm in diameter.
But, still no idea on what the backspacing is...
My plan is to go up to a 8" rim, and an 11.5" wide (maybe 12.5") tire, but i want the rims to push the tires out quite a bit farther so i lose this annoying rubbing on the lower control arms.
Right now i've got 10.5" wide tires, and they rub at about 85% of full lock.
Anyways, i'd go measure my own rims, but they all have tires mounted on them making it harder to get an accurate measurement.