TrailOfGears
NAXJA Forum User
- Location
- Hawaii
I just picked up this Jeep from my brother a couple months ago. Problem is that I have to crawl under the jeep and manually move the linkage to shift into 4WD.
Decided to take a closer look at whats going on down there today. It seems to be missing the adjustment arm which I found in the back of the jeep. However, there is the middle section between the two brackets that the arm attaches to that does not seem to be lining up right between the two brackets. I think this is due to the cross member drop kit that is installed on the jeep.
before I go about re attaching the arm, I'm hoping someone can point me in the right direction to go about correcting this problem with the linkage.
I would post a pick, but it does not appear the site will let me.
https://drive.google.com/file/d/0B5f8App1KN0tOHJyY2c1aTMybWhlcktFVk85T2dCS19jZ0RF/view?usp=sharing
Decided to take a closer look at whats going on down there today. It seems to be missing the adjustment arm which I found in the back of the jeep. However, there is the middle section between the two brackets that the arm attaches to that does not seem to be lining up right between the two brackets. I think this is due to the cross member drop kit that is installed on the jeep.
before I go about re attaching the arm, I'm hoping someone can point me in the right direction to go about correcting this problem with the linkage.
I would post a pick, but it does not appear the site will let me.
https://drive.google.com/file/d/0B5f8App1KN0tOHJyY2c1aTMybWhlcktFVk85T2dCS19jZ0RF/view?usp=sharing