Mr. Black
NAXJA Forum User
- Location
- The Colony, Texas
Asking $3000 o.b.o. No time to wheel right now and just figure I'd start over when I do get time again.
1994 XJ
4.0 6cyl
AX15 5 speed
NP231 w/SYE
Tom woods rear drive shaft
D44 out of an 87 XJ. With mini spool and 3.54 gears
HP D30 3.54 gears and lock right and shafts from a TJ (for bigger u-joint)
TNT Y-link
Rusty's gas tank skid
Rusty's 4.5" front springs
Big Offroad rear leafs
Rusty's extended brake lines
R.E. track bar brace and track bar
TNT track bar mount
Poison Spyder customs tie rod
33x13.5x15 SS TSL's
Black soft 8's rims
Rubicon Monotube shocks
JKS BPE's front and rear
I've got TNT unibody stiffeners to go with it, but they aren't installed.
Also have front recovery hooks and brackets for it that aren't installed.
No bumpers on the Jeep, but both stock ones are sitting in my garage.
I've got the brake master cylinder from a 97xj sitting in the garage that can go with it also, just never got around to putting it on.
No swaybar, but I have the stock one lying in the garage also.
Everything works, Heat, AC, etc. Manual windows, I've changed out the stock dummy light guage cluster for one that has all the guages. installed a radiatorbarn 3core radiator last summer, new coil last week, new plugs, wires, dist. cap last summer. Showing 14x,xxx miles, but I believe that to be higher than actual due to speedo being off when I got it (Speedo read faster than actual, and I drove it that way for about a year, who knows how long before that). Replaced headliner last summer.
Known issues...
Leaking pass. side rear axle seal (but I have new bearings and seals for both sides to go with the XJ, they just need to be installed).
leaks power steering fluid
More pictures coming...
1994 XJ
4.0 6cyl
AX15 5 speed
NP231 w/SYE
Tom woods rear drive shaft
D44 out of an 87 XJ. With mini spool and 3.54 gears
HP D30 3.54 gears and lock right and shafts from a TJ (for bigger u-joint)
TNT Y-link
Rusty's gas tank skid
Rusty's 4.5" front springs
Big Offroad rear leafs
Rusty's extended brake lines
R.E. track bar brace and track bar
TNT track bar mount
Poison Spyder customs tie rod
33x13.5x15 SS TSL's
Black soft 8's rims
Rubicon Monotube shocks
JKS BPE's front and rear
I've got TNT unibody stiffeners to go with it, but they aren't installed.
Also have front recovery hooks and brackets for it that aren't installed.
No bumpers on the Jeep, but both stock ones are sitting in my garage.
I've got the brake master cylinder from a 97xj sitting in the garage that can go with it also, just never got around to putting it on.
No swaybar, but I have the stock one lying in the garage also.
Everything works, Heat, AC, etc. Manual windows, I've changed out the stock dummy light guage cluster for one that has all the guages. installed a radiatorbarn 3core radiator last summer, new coil last week, new plugs, wires, dist. cap last summer. Showing 14x,xxx miles, but I believe that to be higher than actual due to speedo being off when I got it (Speedo read faster than actual, and I drove it that way for about a year, who knows how long before that). Replaced headliner last summer.
Known issues...
Leaking pass. side rear axle seal (but I have new bearings and seals for both sides to go with the XJ, they just need to be installed).
leaks power steering fluid
More pictures coming...