theviper90210
NAXJA Forum User
- Location
- Raleigh
Hey guys I have just got a 93 xj motor swaped into my 99 (bad motor) and im starting to hook everything up. I noticed that my distributor plugs are different, no do i need to swap my 99 dizzy into the 93 motor or can I just cut the wiring harness off the dizzys and swap them, they are both 3 wires harness with a white in the middle of 2 black wires. If I have to swap the while dizzy itself will I have to worry about any timing. The reason I would rather cut the harness is the 93 distributor is brand new. and the 99 insides are different
Also on the 93 block it has the hole for the rear temp sensor that the 99 does not have, I just need to plug the hole. correct?
My friend told me to just swap the two dizzys what do yall think Thanks guys
Also on the 93 block it has the hole for the rear temp sensor that the 99 does not have, I just need to plug the hole. correct?
My friend told me to just swap the two dizzys what do yall think Thanks guys