ccflexj
NAXJA Forum User
Posting for a friend
Pics can be seen here http://www.pirate4x4.com/forum/showthread.php?t=1070708
For sale is what's left of an '87 Jeep Cherokee. I have literally replaced or modified everything except the engine. It's been my baby for over 5 years, but it's time to grow up and buy a house.
Asking $7,500
Currently located in Salinas, CA but I live in Los Angeles. Can meet anywhere (maybe Hollister) for a test run as long as you're a serious buyer and have cash in hand.
Build thread here:
http://www.pirate4x4.com/forum/showthread.php?t=985651
Exterior
- Full exo out of 1 5/8" tube
- Unibody frame plating and sliders
- Bumpers with tow points
- Back half of cab chopped
- 36x13.50R17 Bias Super Swamper Iroks
- DIY Beadlocks Powder coated
- Full size spare
Drivetrain
- Perfect running 4.0 liter inline six
- Just passed smogged and registered until May '13
- AX15 Manual Transmission- the guy I bought it from said it was rebuilt 1000 miles ago but no paperwork
- NP231 transfer case with slip yoke eliminator
- High Flow Magnaflow cat
- Spintech Muffler
- Custom drivelines
- 4.88 gears
- Rear Cherokee Dana 44 rear
- 33 spline grande Alloy chromo shafts
- Detroit locker rear (33 spline carrier)
- Front Dana 30 re-tubed for custon 3 link (see build)
- Full chromo shafts
- Brand new Grizzly locker
- Warn Locking Hub kit
- Synergy Suspension HD ball joints
- Inner C knuckle gussets
- Powdercoated Ruffstuff diff covers
Suspension
- Rear Custom dual triangulated four link
- Rear Poly Performance truss kit
- Front custom three link with panhard
- Crossover steering with heim joints
- Approx 6.5" lift
- Fox Remote Reservoir Shocks front
- Bilstein 5100s rear
- Daystar bump stops
- All Poly Performance Johnny Joints, bushings, and Ruffstuff heims used
- Wheelbased stretched to 109"
Well over $10K invested plus 100s of hours
Tons of spare parts.
For the full asking price I will throw in the 38" Toyos on 20s
PM me and I can get you in contact with the seller or contact him through Pirate
Thanks
Pics can be seen here http://www.pirate4x4.com/forum/showthread.php?t=1070708
For sale is what's left of an '87 Jeep Cherokee. I have literally replaced or modified everything except the engine. It's been my baby for over 5 years, but it's time to grow up and buy a house.
Asking $7,500
Currently located in Salinas, CA but I live in Los Angeles. Can meet anywhere (maybe Hollister) for a test run as long as you're a serious buyer and have cash in hand.
Build thread here:
http://www.pirate4x4.com/forum/showthread.php?t=985651
Exterior
- Full exo out of 1 5/8" tube
- Unibody frame plating and sliders
- Bumpers with tow points
- Back half of cab chopped
- 36x13.50R17 Bias Super Swamper Iroks
- DIY Beadlocks Powder coated
- Full size spare
Drivetrain
- Perfect running 4.0 liter inline six
- Just passed smogged and registered until May '13
- AX15 Manual Transmission- the guy I bought it from said it was rebuilt 1000 miles ago but no paperwork
- NP231 transfer case with slip yoke eliminator
- High Flow Magnaflow cat
- Spintech Muffler
- Custom drivelines
- 4.88 gears
- Rear Cherokee Dana 44 rear
- 33 spline grande Alloy chromo shafts
- Detroit locker rear (33 spline carrier)
- Front Dana 30 re-tubed for custon 3 link (see build)
- Full chromo shafts
- Brand new Grizzly locker
- Warn Locking Hub kit
- Synergy Suspension HD ball joints
- Inner C knuckle gussets
- Powdercoated Ruffstuff diff covers
Suspension
- Rear Custom dual triangulated four link
- Rear Poly Performance truss kit
- Front custom three link with panhard
- Crossover steering with heim joints
- Approx 6.5" lift
- Fox Remote Reservoir Shocks front
- Bilstein 5100s rear
- Daystar bump stops
- All Poly Performance Johnny Joints, bushings, and Ruffstuff heims used
- Wheelbased stretched to 109"
Well over $10K invested plus 100s of hours
Tons of spare parts.
For the full asking price I will throw in the 38" Toyos on 20s
PM me and I can get you in contact with the seller or contact him through Pirate
Thanks