cruiser54
NAXJA Forum User
- Location
- Prescott, Az
picked up a 242 from a 92 for $110 is there any writeup on how to change the input shaft? i should probably check the transmission too as the engine was swapped out with a ~93 maybe it has the same year transmission. doubt it but you never know.
Pull the old one first. If you don't wanna count splines, here is the diameter of each. Roughly.
AW4 output splines
21 spline is about 1.08” diameter or 27mm
23 spline is about 1.22” diameter or 31mm