Search results

What about the heater/defrost ducts? I have a broken defrost door actuator and might be interested in the assembly for parts. Thanks, Steve

I see pictures of various bumper styles in this thread. What does the current version for the XJ look like? Thanks, Steve

Definitely take a class or get some instruction from someone who knows welding. You'll get a chance to run some good quality equipment that is properly set up so you actually learn to weld instead of fight with equipment. Feedback on what's going right or wrong from someone who knows will get...

Since changing the O2 sensor the problem has gone away. Hasn't stumbled once in the last 5 days. Thanks for the tip. Steve

I checked fuel pressure last weekend. Running = 45psi, after shutting off drops to 40 and after 30 minutes down to 30 psi. Haven't checked TPS but I changed O2 sensor today. I figured with 180K on it I wouldn't feel bad even if it didn't turn out to be the problem. I didn't have time during...

For the last couple weeks my 4.0 has been doing something strange. After being driven long enough to come to operating temperature, if I park it for a while (10-15 minutes) and then start it and take off again, it stumbles while trying to accelerate and acts like it's going to die though it...

When are you going Howard? I might be up there this weekend.

You might want to check with NPS or WA DOT before you try to head over Chinook Pass. My wife and I were up there last weekend and it was barricaded and a Park Ranger was stopping everyone and turning them around at the parking area east of the summit. Lots of traffic was coming up 410...

Goldmyer hot springs is on the MF Snoqualmie. The "middle middle" is a very popular class 3/4 whitewater run which we've done quite a few times. Too low for that now. No wheeling up there that I'm aware of though creek boaters running the upper section in early spring sometimes need 4wd to...

FWIW, WA State Surplus only sells a small percentage of their vehicles on Ebay. Most are sold at quarterly auctions. You can view the schedule at http://www.ga.wa.gov/surplus/auction.htm It's also possible to view the results from previous auctions. There were some Cherokees sold in June - a...

The bearing caps are assembled to the housing and then machined. Because of that each cap will only work in its original position on the housing it was set up for. You can't switch them left and right or between housings. What the other guy was saying is that mismatched ones could be...

Here's a link you might want to check out: http://www.mutualmaterials.com/Professional_product.asp?pt_id=123&p_id=308 This type of paver isn't real cheap but may look better then concrete or asphalt in the long run and will definitely support the kind of traffic you are looking at. You might...

We have a basic Garmin Etrex which has been used some on hiking trips as well as wheeling. It actually came in pretty handy our first time on Gold Bar Rim trail in Moab a couple years ago. It got pretty confusing figuring out which turns to take to stay on the trail. We had a book with us that...

Here's a couple that can do what you want. I've never dealt with Aukeen personally but it has been recommended by other NAXJA members in the past. I've done business with Fleetpride several times on Jeep stuff as well as big truck stuff (which is their specialty) and they've always done good...

There are several reasons it could have failed. One of the most common would be corrosion or oxidation of the contacts in the switch or connector. That creates resistance and the result is heat. Another possibility is the heater fan motor could be failing and drawing excessive current which...

If he knows what he is doing and warrants his work that is a great deal for labor. You could easily spend $350 or more for labor to overhaul and setup the differential at many shops. You might ask for an estimate on the cost of parts to make sure he isn't hoping to make up the difference...

If you get into Tacoma at all here's where I buy solvent: Pacific Fluids LLC (253) 284-4302 2244 Port of Tacoma Road Tacoma, WA 98421-3607 Steve

Search eBay for similar items and watch a couple auctions to see what they go for. Another great resource to check on values would be http://www.keh.com/onlinestore/home.aspx They are the largest used camera equipment dealer anywhere. If you describe it accurately they will even give you a...

Here's a few from last summer. Most are on the 4W319 and a couple are on 4W316. You can also view some trail descriptions with a couple pics at: http://nwjeepn.com/WAtrails.htm

There's really nothing to speak of in Liberty. There's a place to eat on 97 in the vicinity of Liberty and there's an Espresso stand by the cafe (at least there was last fall but it wasn't all that great). Cle Elum is the closest place to Liberty for all services although if you're up on top...