Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Sorry have been busy this weekend. The lower arms do have a rubber bushing at the frame mount end. So they are not all hard joints.
I'll grab pics of the control arm angles but they are perfectly fine. Nowhere near being harsh angles.
The kit was used but barley. The Johnny joints were all...
Aired down to 27 psi. Still rough. I'm gonna switch the springs out to my re ones and see if it's different. I ran teraflex coils in mt tj and they road AWSOME. But maybe the spring rate for their xj kit is different?
I understand the front set up of the teraflex "long arm" is retarded w using short adjustable uppers but long lowers. I am going to make it a radium arm set up by attaching the uppers to the lowers. Besides that the rest of the kit is nice.
Sorry it's 32psi not 35 miss type. But either way same pressure w both lifts unless the bump just traveled threw the arms differently. I'll lower it to 30 but I don't see it changing much.
00 xj. I recently went from a rubicon express 5.5" short are lift w ome shocks to a 6" long arm kit and Bilstein 5150s. I have the front axle all dialed in. But the front end when hitting potholes hits prety damn hard. I have plenty of up and down travel w the shock. I am assuming it is from...
I have a rustys double shear track bar up to 5.5" lift. I will have it out next week. I had to order their longer one seeing I changed lifts in mupy jeep. Located in Pembroke,ma $50. Great shape.
There is a round plastic canister attached to the back of the front bumper on the passenger side. There is a plastic line w rubber ends and fittings along this line that usually rot out. Follow the line and check all the rubber connections. This feeds the vacuum that goes to your control unit...
I searched but couldn't find anything. I know on a zj if you have keyless entry in one vehicle and swap the BCM your remote is programmed to that and you can swap it right into another.
I have an 01 xj and a 01 parts xj. I don't have the remote for the keyless entry for my daily driver but my...
I have a 242 t case from a 98 cherokee I was going to put it into my gf's 5.9 and get rid of all wheel drive. But shes gonna trade it in over the winter for a new wrangler. So I no longer have any use for it. $100 located in pembroke,ma
Just got your post on my 5.9. I would love to trade for your rig. But you are located 20hrs away from me. If I could could some how get that to work I would. I guess guess if we both met in the middle it wouldnt be so horrable. ???