Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Regardless of whether or not the AC is on or defrost is on, the AC clutch pulley is spinning 100% of the time the engine is on. So if you have a problem with that such as a bad bearing causing drag, it could be causing a slight decrease in power/mileage. Of course it depends on how bad the...
http://www.youtube.com/watch?v=zBW2eImYEpA
Horrible video, but you can see what's involved..
Kinda dumb that midway he found out that wasn't the cause of the leak in the first place. Lol.
I have the 97+ window felts (wiper seals) on my 87. BUT, I also have all the rest of the window and components from the 97+ as well. I'm not sure if it would work if just replacing the seals without the rest of the stuff.
Yea, you have to upload the pics on a seperate site (I use flickr, other use photobucket, postimg, imgur etc.) and then just paste the url in. Flickr has a "share" link in each pic that gives you the code to paste into your post. It works well for may forums though I forget if Naxja is one of them.
Well, guessing by the symbol printed on there, a diode may have been there. Sorry I don't know what mines looks like as it's installed.
Brakes, one thing I thought of is to check that the calipers aren't switched left to right. The bleeder valve should be on the top of the caliper, if it's on...
Hmm, well, perhaps I'll change the fluid out for synthetic and add fresh LSD additive. I hear the GM stuff is the best. I went to a Toyota dealer and they even told me they go over to the Chevy dealer across the street and buy it there because "it's the best"..
I would check the CTS with a ohm meter and a thermometer in a pot of water with different temps. There should be a graph somewhere with the values it should read at certain temps.
Even though the dash gauge is in the expected range, I wouldn't really trust it for much more than a consistency...
I too like "runnin'onempty" always choose poly when given the choice. My preference comes from cars where I want to increase the road feel and handling characteristics, so that's why I choose poly. You may feel differently about what you want from your vehicle and maybe poly is not the choice...
Well, I changed it 6yrs ago and it sat in the garage until recently... I don't remember for sure if I put in friction additive for the LSD, but I don't know why I wouldn't have, so I'm guessing I did.
I was considering changing to synthetic for the small mpg advantage.
Today I heard and felt un-rhythmic knocks when going through large radius turns slowly. I.e. on a windy road with slow traffic probably less than 5mph. My XJ does have a limited slip diff, is this a normal feeling? It does kinda feel like it could be the limited slip clutches slipping. I've...
I believe the 249 uses a viscous coupling where the 242 uses an open differential. This is only for full time 4wd. All other settings should be the same.
I dont' know if the info was already presented (I skimmed through previous posts), but DFlinstone on Cherokee Forum started a thread on the 746 Injectors. You might want to take a look at it if you are going to swap your injectors for your Renix. The are supposedly an exact match in specs to...