So, I have a wicked big job ahead of me being that I have several different tasks that I need to do consecutively and will likely take at least a week.
First let me ask this question:
I’ll be doing some rust removal and prevention to the differentials, frame, and wheel wells. Bought all the stuff but want to run my process by you guys to make sure I have it down right.
1. Degrease
2. Remove rust with wire wheel/Brillo pads
3. Degrease again (for good measure)
4.Apply Klean Strip Metal prep
5. While everything down with paint thinner
6. Apply POR 15
7. Apply RP-342
Does that sound about right? Really wanted to put in the added percussions for best protection.
I’ll be replacing all my breaks, rotors, calipers, u-axel u- joints, ball joints, and adding a control stem drop bracket, and new tie rod on the front of the Jeep tomorrow. So, figured id do all the rust stuff under there while I’m at it.
Will post some pics soon. Hoping for it to start getting warmer in the next couple days. Hopefully above 60.
is there anything that I’m missing or should do differently with regard to my plan for the rust?
Thanks guys,
-DF
First let me ask this question:
I’ll be doing some rust removal and prevention to the differentials, frame, and wheel wells. Bought all the stuff but want to run my process by you guys to make sure I have it down right.
1. Degrease
2. Remove rust with wire wheel/Brillo pads
3. Degrease again (for good measure)
4.Apply Klean Strip Metal prep
5. While everything down with paint thinner
6. Apply POR 15
7. Apply RP-342
Does that sound about right? Really wanted to put in the added percussions for best protection.
I’ll be replacing all my breaks, rotors, calipers, u-axel u- joints, ball joints, and adding a control stem drop bracket, and new tie rod on the front of the Jeep tomorrow. So, figured id do all the rust stuff under there while I’m at it.
Will post some pics soon. Hoping for it to start getting warmer in the next couple days. Hopefully above 60.
is there anything that I’m missing or should do differently with regard to my plan for the rust?
Thanks guys,
-DF