old_man
NAXJA Forum User
- Location
- Loveland, Colorado
I have an AW4 in my 85 4.7L XJ. After sitting for a few hours, it takes about 15 seconds after starting for it to want to move when put in gear. After that, all is fine. I chalk it up to old seals, but I have one interesting problem. If I rev too high under load, ie. ~=4000 rpms, it will act like you put it neutral and the motor will free wheel. As soon as you let off the gas and the rpms drop, the tranny shifts back into gear.
The tranny fluid was changed a couple of times this summer fighting with a bad seal rear seal and a pan leak, so it is fine and at the correct level.
The tranny fluid was changed a couple of times this summer fighting with a bad seal rear seal and a pan leak, so it is fine and at the correct level.