ebrake cable for 8.25 to d44 swap

J

jnackos

NAXJA Forum User

Location

Salem, Oregon

• May 5, 2006

• #1

I did a search on this and was suprised to find so little info. From those of you who have done this swap (8.25 to XJ d44), what is the best cable to use for the ebrake? PN's would be appreciated.

Thanks!

Jordan

 

Yucca-Man

NAXJA Member # 683

Location

Castle Rock, CO

• May 5, 2006

• #2

I used the same ones from my C8.25 in the D44. Then after realizing they were too short for the lift, I used passenger-side YJ lines. http://www.yuccaman.com/jeep/dana44.html#ebrake

 

1toughxj

NAXJA Forum User

Location

Gilbert, AZ

• May 6, 2006

• #3

I used the same cables and I am @ roughly 8" of lift.

 

J

jnackos

NAXJA Forum User

Location

Salem, Oregon

• May 6, 2006

• #4

You used the same cables - meaning the YJ cables?

 

1toughxj

NAXJA Forum User

Location

Gilbert, AZ

• May 6, 2006

• #5

I have a 2001 XJ and I used the stock cables that run down the driver side then split off to the drums at the axle.

 

Frank Z

NAXJA Forum User

Location

Colorado Springs

• May 6, 2006

• #6

D'oh...never mind.