Wiring a set of Baja lights into my brights

I'd like to pick up a set or two of the Baja lights from Walmart and would like to wire them into my brights, so when my brights are on, the fogs are on. I am a wiring noob, and was wondering how I'd go about doing this? Please no one sentence answers, I really don't know how to set this up.

Thanks!

http://www.gizmosforall.com/howtowire.htm

Run the lights with a relay and on the "switch" side of the relay splice into a wire from your brights. When you turn your brights on, it will complete teh curcuit in the relay and the bajas will turn on.

Edit: technically one sentence and a link

Check out any of the headlight harness how-to threads. Several threads contain parts lists, costs, tools needed, where to buy, etc to simplify things for you. Change some connections, and your headlight harness is now a fog/driving/offroad lighting harness.

This is what I did And work good
http://www.iidesign.info/Or_Photo/lite_wire.pdf
With photo's http://www.iidesign.info/OR_01XJ.htm

I'll need two relays hidden under the hood and one switch in dash
Hi Beam input is spliced off of the wire in your headlight harnes.
+12V Battey is spliced off of the positive battey post.