Xmember bolts with DB's

[Jeepster4wd]

Does anyone know the size needed in conjunction with the drop bracket braces?

 

[XJ91]

All you need is:

PARTS LIST

Description Qty

Transfer Case Drop Bracket 2
M10 x 50mm Bolt 4
M10 Lock Washer 4
M10 Flat Washer 4

 

[Yucca-Man]

XJ91 - where'd you get the parts list? The best I found so far was from the RE9900/9905 installation instructions:
1 Hardware bag kit with:
4 3/8 x 18 x 1.25” Hex bolts
8 3/8 Flat washers
4 3/8x18 Lock nuts
2 10mm x 75mm Hex bolts
2 10mm Top lock nuts & washers
8 ½” Washers
2 1/2”x13 Lock nuts
2 9/16x12 Lock nuts
2 1/2 x 13 x 3.5” Hex bolts
2 9/16 x 12 x 4.5” Hex bolts

 

[XJ91]

XJ91 - where'd you get the parts list? The best I found so far was from the RE9900/9905 installation instructions:

From BDS Installation Instructions, You will need Adobe Reader..

Installation Instructions Transfer Case Drop Kit

 

[Abugarcia]

T-case drop vs. control arm drop? Both are correct for what they are.

 

[Jeepster4wd]

which are the 4 bolts that connect to the xmember?

 

[Yucca-Man]

which are the 4 bolts that connect to the xmember?

Those would be the 10mm (10mm x50 or x75, depending on application) bolts. The 10mm x75 are an inch longer and are intended for a t-case drop but will work without one as well.

 

[Jeepster4wd]

oh thier metric?? why cant they just keep with the standard system....

 

[Yucca-Man]

Just be glad they aren't Torx... Most of the XJ seems to be metric at this stage anyway; it's only the times when SAE is in my toolbox, tantalizingly out of reach, that I need those.