Cburb88XJ
NAXJA Forum User
- Location
- Purcellville, VA
Hello new to forum, well not really but new account, ive tried researching a good bit but want to make sure i understand some things and get prepared. Im getting different axles which are basically built to the max minus RCVs the front is a d30 hp fully built wj swapped adapted to 4.5 pattern, chromoly shafts, trussed, gusseted outer c's, riddler diff cover, detroit full case locker 4.56s and everything but my plan in order to take advantage of the crossover steering OTK and using OTA trackbar is this...
Order JKS Fab tie rod and drag link with their nuts, ream knuckles or use goferit inserts, Order JKS trackbar relocation bracket. as for tie rods not sure to use 1 ton or WJ ones. Far as the trackbar deal gos i have a IRO double shear adjustable trackbar and im curious if i could just cut a certain amount from the center and use it for the OTA, thats the one thing im not too sure on, pretty sure nobody makes a trackbar just for this most people probably go custom.That OTA mount raises mounting location 4 inches. Oh and im at 4.5 lift now and later on down road i will be either 6 or 6.5 lift. Thanks for any help. :cheers:
Order JKS Fab tie rod and drag link with their nuts, ream knuckles or use goferit inserts, Order JKS trackbar relocation bracket. as for tie rods not sure to use 1 ton or WJ ones. Far as the trackbar deal gos i have a IRO double shear adjustable trackbar and im curious if i could just cut a certain amount from the center and use it for the OTA, thats the one thing im not too sure on, pretty sure nobody makes a trackbar just for this most people probably go custom.That OTA mount raises mounting location 4 inches. Oh and im at 4.5 lift now and later on down road i will be either 6 or 6.5 lift. Thanks for any help. :cheers: