Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
1. remove all trim but the lower quarter panel trim piece. (seatbelt trim, rear trim by the hatch, and upper metal trim.)
2. Get two flat head screwdrivers, and insert one where it looks like it would be easist to start.
3.Put second one about 1 inch away and tuck the seal up and under the outer portion of your vehicle. Now you should have a small piece up and under going out.
4. Move the first screwdriver over past the second about an inch. Repeat.
5. The farther you get, the easier it becomes. It should get to the point about half way around you can go outside your rig and just pull the glass out.
mucho grassy ass.
I already have all the trim removed (just didn't think of doing it from the inside!), 1 door, lower dash, seats and carpet.
Biotch is stripped down. Engine comes out (hopefully) on sunday!