deathera
NAXJA Forum User
- Location
- Portland Metro
Teraflex SYE and Adam's driveshaft
Last edited:
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
What did you do to your XJ today
- Thread starter Cherokeefever
- Start date
Teraflex SYE and Adam's driveshaft
- Location
- WA state
Swapped my old set of Ford Orange top 19lb/hr injectors into my MJ. Runs much smoother than it did.
kevin92xj
NAXJA Forum User
- Location
- Everett WA
I turned my stock tie rod into a taco at Reiter. I'll post the video in a bit!
Jbh97009
NAXJA Forum User
- Location
- Damascus, Oregon
New (to me) steering box is in finally! Hopefully it drives better now, thing was scary on the road....
kenny811
NAXJA Forum User
- Location
- Damascus, OR
Today is the day my jeep goes through Oregon deq. The Oregon plates. Not looking forward to going in the dmv, but what can ya do!!!
kenny811
NAXJA Forum User
- Location
- Damascus, OR
Yep, Alicia & I have a house in Gresham
Oh, Vancouver south
BPB
NAXJA Forum User
- Location
- Battle Ground, Washington
I had a productive day, pulled a subaru motor, cleaned the garage, then got to work on the jeep.
Started by welding in a new nut for my swaybar
Then finished my shock mounting
Holes sealed
Carped trimmed
Then glued back together and trimmed my trunk mat to fit.
It isn't perfect, but it's good enough for an old jeep.
Started by welding in a new nut for my swaybar
Then finished my shock mounting
Holes sealed
Carped trimmed
Then glued back together and trimmed my trunk mat to fit.
It isn't perfect, but it's good enough for an old jeep.
ceb0217
NAXJA Forum User
- Location
- oregon,corvallis
drove it for the 1st time sense NWF and I went sooooooo fast the left front fender flew off, or at least most of it did.
- Location
- Salem, OR
ceb0217
NAXJA Forum User
- Location
- oregon,corvallis
I don't know how to post pictures from my phone.
BPB
NAXJA Forum User
- Location
- Battle Ground, Washington
Tapatalk
kenny811
NAXJA Forum User
- Location
- Damascus, OR
Made a hook stop!!!
- Location
- Vancouver, WA
Jbh97009
NAXJA Forum User
- Location
- Damascus, Oregon
Bout time you got tags!
kenny811
NAXJA Forum User
- Location
- Damascus, OR
Sweet, I get my plates this morning. My cat " cut in half, clamped to the pipe" worked!!!!
- Location
- Vancouver British Columbia
Got some gas at a shady spot. Jeep was running fine before then. After, it started stumbling quite a bit, I've ran through half the tank, could be a coincidence with the gas, but now have a CEL that keeps coming back with P0171 lean condition. Jeep died and wouldn't re-start in the taco bell drive thru, they sent the calvary of teenaged employees to push me out of the way... ...anyways, gotta look into that code. Seems to run fine at speed, but runs rough after idling for a minute or so. Or after turning it off, runs rough. Hesitates and even misfires when I give it some skinny, like passing on I-5 heading north. Will keep you posted, might start a thread about it.
- Location
- Sandy,Oregon
Threw on some shocks.
