AwesomeXJ
NAXJA Forum User
- Location
- Vancouver WA.
97 xj 4.0 ax15 np231 3in lift
So this past weekend i put in an sye. While driving home my speedo went out, i did install the retaining rings to keep speedo gear in place. I inspected it and checked the plug, all looks good. But still no signal.
Also, since the install my engine is running odd at idle and low rpms. Not bad like crap just a little rougher with more vibration into the body.
So since i overlooked the fact that i needed a v8 zj front and not an xj front shaft for the rear, i have no rear shaft hooked up. Ive ran in fwd before on this rig but this time it seems difficult to start moving from a stop and the front end wobbles when turning tight.
Any insight on my issues would be great. Thanks!
So this past weekend i put in an sye. While driving home my speedo went out, i did install the retaining rings to keep speedo gear in place. I inspected it and checked the plug, all looks good. But still no signal.
Also, since the install my engine is running odd at idle and low rpms. Not bad like crap just a little rougher with more vibration into the body.
So since i overlooked the fact that i needed a v8 zj front and not an xj front shaft for the rear, i have no rear shaft hooked up. Ive ran in fwd before on this rig but this time it seems difficult to start moving from a stop and the front end wobbles when turning tight.
Any insight on my issues would be great. Thanks!