VAhasnoWAVES
NAXJA Forum User
- Location
- Lake City, Mi
in preparation for a HP44 swap i purchased a (stock) waggy pitman arm to give me the drag link angle and throw needed for high steer. i was warned that there may be clearance issues with the nut of the TRE and the frame... but the price was right and i decided to try.
first off... i hadnt heard of clearance issues with a waggy arm. is this a thing? can i expect to see issues?
second... i feel like i can get the arm to seat properly. i cant get the face of the arm to the bottom of the splines. this is where my stock arm sat before i removed it. is this arm fully seated or does it still need to go further on the splines?
first off... i hadnt heard of clearance issues with a waggy arm. is this a thing? can i expect to see issues?
second... i feel like i can get the arm to seat properly. i cant get the face of the arm to the bottom of the splines. this is where my stock arm sat before i removed it. is this arm fully seated or does it still need to go further on the splines?